Mushkin XP2-8500 Expert Reviews

Mushkin is well known for the solid memory kits they make. Today we have the Mushkin XP2-6400 2 GB on our test bench. These modules are specced to run at DDR2-800 at CL4. With a price of $150 for 2 GB this kit is sure not the cheapest, but it comes ...

High clock speed, Runs fine at default voltage of 1.8V, even at CL3, Can run DDR2-1066 @ CL5, Flexible timings, Good performance

A bit more expensive than other DDR2-800 CL4 kits, 3-2-2-4 not possible

Mushkin's XP2-6400 2 GB is a rock solid memory kit that offers nice overclocking headroom and voltage scaling. It can be configured to run at a wide range of timings, for example 3-3-3-4, 4-4-4-12 or 5-5-5-15. This will make an investment into this ...

Mushkin's XP2-8500 4 GB DDR2 memory is the only kit on the market that can run DDR2-1066 in a 4 GB configuration. While other manufacturers have to use CL6 @ 800 MHz, Mushkin can use CL5 @ 1066, at around 2.30 V. Having 4 GB of system memory may soon ...

4 GB, High clock speed, Runs fine at default voltage of 1.8V, Flexible timings, Good performance

Expensive, Works best only on 64-bit OS with 64-bit applications

At the moment a lot of memory manufacturers are carefully probing if there is a market for 4 GB kits in DDR2 Non-ECC variety. However, Mushkin is the only one who offers a hardcore overclocking kit that runs DDR2-1066 @ CL5. Many other companies have ...

With the XP2-6400 Mushkin has released their second generation of DDR2-800 memory. The memory comes with default timings of 4-4-3-10, which is a good deal better than most of the competition. The elegant black heatspreaders add to the look of this ...

Performs great at stock voltage, Overclocks far beyond advertised speeds, Over 1100 MHz with relaxed timings of CL5, Timings can be tightened a lot

Needs a good chipset to perform best, Not cheap

Wow! This is some nice memory. It will fit EVERY usage scenario I can think of. You want to run tightest timings? Check. You want solid overclocking? Check. You need absolutely blazing clocks with a bit more relaxed timings? Check. The Mushkin XP2 ...

With native support for DDR2-1066 by the new Intel Bearlake chipsets are suitable high-performance storage for broader buyers become interesting. With the SG33G5 comes in the first barebone with Bearlake G33 chip, but this has not yet 1066-mode in the Bio...

€ (Stand 19.07.2007) stocked gelistet (plus shipping). He is priced so cheap. Equivalent items with the same timing are not available for less money, and top is, as always, no limit

still have the memory prices at an annual low state, which is currently packs 2GB of DDR2-1066 at 200? gets delivered !

were the building blocks in a standard blister pack (,) with a short, English-language installation instructions, including problem-solving strategies. You need to memory but also no longer

. December 2006 has given us the press release about new XP2-8500 modules are achieved, of course, we immediately wanted to test. Since we are on the hardware are top of our board and a memory clock of 1200 MHz and allows us to come Mushkin 8500 as called...

Mushkin memory were recently forgotten something, why else. Apparently you can get the promotional drums stirred too little or just for few positive headlines. In earlier times there were some compatibility problems with some boards, which led to resentme...

Once again we have the EMS-6400 "of Mushkin RAM 800Mhz with us in the test had, we did not take leave, now also the" XP2 -6400 "800Mhz test. With this test, we extend our current DDR2 6400 (800 Mhz) test series. Manufacturer Mushkin has now...

The 800 Mhz Mushkin memory of the company with the timings of 4-4-3-10 could convincing. Especially in matters of price / performance and excellent stability is really a super Mushkin products succeeded. Even when overclocking the RAM tests always remaine...

The new year, we meet with a rapid start memory test report. Manufacturer Mushkin wants with his current DDR2 XP2-8500 Speicherkit to the success of the XP2-6400 left off. The dual-channel 2GB kit is working with a contemporary 1066 MHz and provides the u...

some time since our last report DDR2 test passed. Not only that, since the prices are very positive to have developed, but the DDR2 is amongst users has more than established. For this reason, the once prohibitively expensive PC2-8500 modules have become...

Mushkin is a name that sounds good in many hardware enthusiasts ears. Deliver these memory modules up to the reputation ?

Tension Settings ( "access time"); High performance; Good overclocking capabilities, Lifetime Warranty, good heat spreaders ;

Price: Price ;

There is no doubt that Mushkin can deliver the goods. XP2-5300 is undoubtedly one of the better 2 GB of sets, it is possible to get to the DDR2 platform currently .