Klipsch RC 35

The RC-35 is a high-performance center channel designed primarily for use with other Reference Series loudspeakers, which it matches both cosmetically and sonically. However, exceptional clarity and neutrality make it a superior choice for any home theater system. The speakers horizontally oriented cabinet is compact enough to fit comfortably on top of most television sets but large enough to provide extended bass response. And front porting allows it to be installed in a cabinet or flush against a wall without loss of sound quality. An adjustable foot enables the RC-35 to tilt up or down for aiming into the listening area. Because of its high powerhandling capability and unusually high sensitivity, the RC-35 can sustain significantly higher output than most conventional center speakers, which is important, since the center channel typically carries about 60% of the total energy in a surround movie soundtrack. The amplifier power required is less than half that of most competitors. High frequencies are reproduced by a 1-inch titanium dome compression driver tweeter. A 6-inch square 90 degrees x 60 degrees Tractrix(R) Horn molded into the front of the enclosure raises the drivers efficiency and controls its radiation pattern to minimize detail-blurring reflections from room surfaces. Flanking the tweeter are dual 6.5-inch polymer frame, Cerametallic(TM)cone woofers configured in a Tapered Array. Klipsch Tapered Array(TM) Technology operates both woofers at the lowest frequencies and only one all the way up to the point where the tweeter takes over, eliminating the destructive middle-frequency interference between woofer outputs characteristic of ordinary woofer-tweeterwoofer lineups. All drivers are magnetically shielded to prevent interference with directview television sets. Premium crossover components ensure optimum signal transfer.